Vertical Garment Steamer - Handheld, for Hanging Clothes

Yes. We deliver across Dar es Salaam and ship countrywide to Arusha, Mwanza, Dodoma, Mbeya, Zanzibar and the rest of Tanzania.

A steamer relaxes creases by putting moisture into the fabric while it hangs. An iron presses them out under heat and weight. A steamer is faster, needs no board, and is far safer on delicate fabrics and anything with a print or a pleat. An iron gives you a sharp crease and a properly flat finish. For travel a steamer usually wins; for a formal shirt collar, an iron does.

Tanzania is nominally 230 V, 50 Hz, and the standard tolerance runs from about 207 V up to 253 V. Before we publish a voltage figure for this unit we want the rating plate confirmed in writing by the supplier - we are not going to guess it on a mains heating appliance. Ask us before you order and we will read the plate on the stock and tell you exactly what it says.

Dar es Salaam water is hard enough that scale builds up in a steam appliance, and scale is what eventually blocks the outlets and shortens the life. Use filtered or distilled water where you can, empty the tank after every use rather than leaving water standing in it, and descale if the manufacturer provides a procedure.

Three markings. 100-240V or 220-240V means it works here on a plug adapter alone. 120V or 110-127V means it will NOT work here and needs a proper step-down transformer - a plug adapter will not save it. And a unit with a manual 110/220 slide switch works only if the switch is set correctly, so check it before every use.

Nothing good, and it is a fire risk rather than simply a breakage. A heating element is a fixed resistance, so doubling the voltage roughly quadruples the power it tries to dissipate. The element runs far above its design temperature within seconds, insulation chars and nearby plastics can ignite. The current drawn is still below the breaker rating, so nothing upstream trips - there is no protection to save you.

No, and the confusion causes real damage. A plug adapter changes the shape of the pins and nothing else - the British Standard for travel adaptors actually requires the words This adaptor does not convert voltage to be printed on the product. If the appliance is rated for 230 V you need only an adapter. If it is not, an adapter will destroy it.

We are asking the supplier for IEC 60335 test documentation - that is the international safety standard series for household appliances, with specific parts for irons, for appliances that heat liquids and for fabric steamers. A CE mark on its own is not evidence of testing, because for this class of product CE is a manufacturer self-declaration rather than an independent assessment. We will publish whatever documentation we receive.